Wireless network setting, Wireless network connection, Wireless network setting -49 – Sindoh M611 User Manual
Page 187: Wireless network connection -49, A60x_ap
4-
49
Settings and Changes of Each Function
4
Wireless Network Setting
Wireless Network Connection
1
Press 【 Menu】 button when the machine is ready to print.
2
Press 【▲】 or 【▼】 until 【 settings】 appears, and then press 【OK】.
3
Go to [Network Settings] [Wifi Network] [Setup Connection].
In [Setup Connection] menu, press 【OK】 to search wireless networks.
4
Available wireless network devices are displayed right after the search completed.
Select one of the wireless network APs(SSID), and then press 【OK】.
e.g) In case the name of the wireless network AP(SSID) is "A60x_AP" it is displayed as follows.
A60x_AP
The reception level is described in front of the name of the wireless network AP(SSID).
The reception level is classified into 5 steps as the following.
Lowest Low Normal High Highest
Note
-
For a stable wireless network connection for the printing, if the reception level is very low,
the AP may not be searched in this machine even if it can be found by other devices.