Sindoh M611 - Manual (Page 192)

Settings and Changes of Each Function
4-
54
Encryption Mode Setting
You can set an encryption method necessary for accessing printers.
1 Press [Menu] when the machine is ready to print.
2 Press 【▲】 or 【▼】 until [Network Settings] appears, and then press 【OK】
3 Continue to operate it until [Network Settings] [Wifi Network] [Wifi-Direct Settings] [Encryption
Mode] appears.
4 Select an encryption method and then press 【OK】.
For more details refer to Encryption Setting
Setup Password
You can setup a password to access the printer.
1 Press [Menu] when the machine is ready to print.
2 Press 【▲】 or 【▼】 until [Network Settings] appears, and then press 【OK】
3 Continue to operate it until [Network Settings] [Wifi Network] [Wifi-Direct Settings] [Setup Pass-
word] appears.
4 Enter a new password
* You can not enter the password in any public mode.
For entering a password refer to 「 Entering IP Wireless Security Password」 P. 4-50