Sindoh M611 - Manual (Page 144)

Settings and Changes of Each Function
4-
6
Detailed Description on Paper Settings
Menu Purpose Value
Assigning Default Source Settings Select the default tray to use for the first time
amount *Tray1, 2, 3 and MPT(multi-purpose tray).
Tray2 and 3 are activated only when mounted.
Trays with same size and type are automatically
connected. Change the settings not identical in
order to cancel the automatic connection of the
trays.
Tray N
Size Tray N Paper size
Note
- N can be 1 or 2. Tray 2 is
available only when the
optional tray is installed.
* Auto, A4, A5SEF, B5SEF, Letter, Legal, Executive,
Statement, US Folio, Quatro, G. Letter, G. Legal
Tray N
Type Paper type of Tray N Note
Note
- N can be 1 or 2. Tray 2 is
available only when the
optional tray is installed.
*Standard paper
MPT Paper
Size Paper size of MPT * A4, A5SEF, A5LEF, A6SEF, B5SEF, B6SEF,
Letter, Legal, Executive, Statement, US Folio,
Quatro, G. Letter, G. Legal, Postcard 100x148,
Postcard 148x200, Postcard 200x148, Monarch
Envelop, Com9 Envelop, Com10 Envelop, C5
Envelop, C6 Envelop, DL Envelop.
MPT Paper
Type Paper type of MPT * Plain paper, Cardstock, Envelop, Transparency,
Paper label, Vinyl label, Postcard
Paper
Texture Paper Texture setting
(Set by paper type) Smooth, * Normal, Rough (If the toner is not
properly attached to the paper, select Rough.)
Paper
Weight Paper Weight setting
(Set by paper weight) Light, * Normal, Heavy (If the toner is not
properly attached to the paper, select Heavy.)
A4/Letter
Substitution It can substitute A4 and Letter
size paper. * On, Off
(*) is Factory default settings