CommScope ATC200-LITE-USB - Manual (Page 3)

ATC200-LITE-USB Teletilt ® RET System
Bulletin 639536 • Revision L October 2014 i
Revision History
Revision No. Date Description of Changes
A October 2006 Released.
B January 2007 Change discussion on device configuration settings in
Section 4 to show that factory installed actuators are
pre-configured to include the antenna model number,
antenna type, and antenna serial number.
C September 2007 No longer uses lite scan.
Calibrate button added for other antenna vendor actua-
tor calibrations.
Added operating instructions for use with SmartBeam™
antennas.
D May 2008 ATC Lite v5.0 supports both AISG 1.1 and 2.0 proto-
cols.
Main screen displays AISG mode.
Added section on switching AISG mode in Andrew ac-
tuators. Added warranty notice.
E November 2008 Updated from Version 5.0 to 6.0.
Added 3 sections about configuring and adjusting
Multiple Integrated Actuators.
F April 2009 Contact information updated
G August 2012 Updated for the features implemented in ATCLIte 7.2
as per the EAO 600300.
H November 2012 Contact information updated
J March 2013 Update the ATCLite7.2 software features
K November 2013 Updated for the features implemented in ATCLite 8.0
with support for full control of TMAs.
L October 2014 Updated the latest CommScope branding to document.