CommScope ATC200-LITE-USB - Manual (Page 14)

Section 1–Program Installation ATC200-LITE-USB Teletilt ® RET System
1-2 October 2014 Bulletin 639536 • Revision L
1. Download the ATC Lite software zip file. From the www.commscope.com click on the Re-
sources drop down and then on RESOURCE LIBRARY link, then select the link Software on
the right side pane named Resources. In the Software page click on the link RET Controller
Software and Firmware to view the download list.
Select the ATC200-LITE-USB link to download the installation zip file (See Figure 1-1).
2. This zip file can be placed in any directory on the PC’s local C:\ drive. Double-click on the zip file
to extract the ATC Lite setup file and its supporting installation documentation.
3. Double click on the setup file (eg. ATCLite80Setup.msi) to begin the installation process. Note
that the number shown in the filename represents the software release version.
During the program installation process, a single antenna definition file and additional support
files will self-extract into the same directory with the program file, and a program icon will be
placed on the computer’s desktop. The antenna definition file provides the program with an
updated drop down list of antennas compatible with the ATC200-LITE-USB controller. Tilt
parameters for each antenna are included in the antenna definition file to show the tilt range
for each antenna and to communicate instructions to the antenna/actuator when tilt adjustments
are made from the controller. Latest firmware files for Tower Mounted Amplifiers (TMA) and USB
driver files are available
4. Follow the on-screen prompts, as shown in Figures 1-2 through 1-5.
5. This installation process automatically installs the relevant USB drivers (32 bit or 64 bit) for con
necting the ATC200-Lite-USB device through USB connection. Proceed to Section 2.3, Control
ler setup for further instructions for connecting using serial or USB.
Figure 1-2. ATC Lite Software Setup Wizard.
Do not connect the ATC200-LITE-USB controller to the computer at anytime during
the software installation process.