Brandmotion 9002-6500-V2 - Manual (Page 7)

INSTALLATION
INSTRUCTIONS
6500 Instructions 12-15-12.doc Page 7 of 10
40. Remove the rear driver’s side sill plate by lifting it at
the front and working your way back with your
hands to release the mounting clips. (Figure 30)
Figure 30
41. Route supplied Chassis Harness behind the lower C-
pillar trim using a plastic trim tool. (Figure 31)
Figure 31
42. Route the Chassis Harness along the rear sill plate.
(Figure 32)
Figure 32
43. Route the supplied Chassis Harness under the B-
pillar lower trim.
44. Remove the front driver’s side sill plate by lifting it at
the rear and working your way forward with your
hands to release the mounting clips. (Figure 33)
Figure 33
45. Route the supplied Chassis Harness along the
driver’s side front sill plate. (Figure 34)
Figure 34
Connect Aftermarket/ NAV Display
46. If needed, install aftermarket display/ Navigation
display as per instructions.
47. Remove driver’s side dash cover by gently prying it
away from dashboard using a pushpin removal tool
taking care not to damage trim. (Figure 35)
Figure 35