Autocue US 10-11-01 WinCuePro News AvStar Interface User Manual
Page 96
WINCUEPRO FOR AVSTAR USER GUIDE
APPENDIX A
VERSION 1.30
96
QTV 2001
SECAM
To configure the IMT card for SECAM composite video output use the
same jumper setting as PAL on J11. In the WinCuePro News software,
from the Prompt menu choose Configuration then Prompt Engine and
ensure that Color Burst is disabled. These settings will generate a mono
composite output.
A6 Internal and External Power Supply - J12
If there is not an ISA slot available in your PC for the I.M.T card you will
have to use the J12 External Power Header (as shown in the diagram
below) to connect the IMT card to your PCs power supply. To do this
firstly check to see if you have a free power socket in your PC, then use
the supplied power adapter cable to connect the J12 External Power
Header to a free Power Header on your PCs power supply.
J12 External
Power Header
4 Way Power
Plug