Autocue US 10-11-01 WinCuePro News AvStar Interface - Manual (Page 81)

WINCUEPRO FOR AVSTAR USER GUIDE SCROLL CONTROLS
VERSION 1.30 81  QTV 2001
7.4 IMT Scroll Control
The IMT scroll control is supplied with WinCue and is connected to the IMT card. This
scroll control does not require any kind of configuration.
Click on IMT Card Scroll Port, then click on OK. You can how use the IMT scroll
control to prompt your scripts.
The simple serial scroll control is connected to a free serial communication port. In
Standard Configuration the simple serial scroll control allows you to scroll the
prompted text up and down the screen and jump between markers.
To scroll the text, turn the knob at the end of the scroll control clockwise to speed
up and anti clockwise to slow down.
To change the direction of the prompted text press the black button
To jump to the next marker press the red button
7.4.1 Configuring for Center Stop Mode
The IMT Scroll Control can be set up for Center Stop mode. In the Configure Scroll
Controls dialogue box, click on IMT Card Scroll Port. Now click on the Setup button to
configure simple serial hand control. The Configure Scroll Control dialog box appears: