Autocue US 10-11-01 WinCuePro News AvStar Interface - Manual (Page 46)

WINCUEPRO FOR AVSTAR USER GUIDE GETTING STARTED WITH WINCUEPRO NEWS
VERSION 1.30 46  QTV 2001
2. Right-click on the story you want to start prompting, then select 'Prompt From Here' from
the drop-down menu that appears.
3. Left-click on the story you want to start prompting, this will select the story (shown by the
black bar), then hold down the left 'Alt' key and press the 'Return' or 'Enter' key.
After using any one of these methods, the prompt and the WinCue prompt (yellow) bar will
move/jump to the chosen story.
3.4 Using the Scroll Controllers
Note: IF YOU HAVE A MULTIBUTTON CONTROL WITH OR WITHOUT A FOOT CONTROL:
The button on the back of the Multibutton Hand Control switches between whether the Multibuttons
scroll knob or the attached Foot Controls (NB. A Foot Controller may not be attached) pedal is to
control the scrolling.
If the button is OUT then the scrolling is controlled by the Multibuttons scroll knob.
If the button is IN then the scrolling is controlled by the Foot Controls pedal.
Using the Multi-Button Hand Controller
The Multibutton Hand Control has twelve buttons and a scroll knob on its right hand side. The scroll
speed is controlled by turning the knob. The functions of all the buttons on the Multibutton are listed
below:
Top row of buttons (left to right):
FWD
Change the scroll direction. The scroll direction is indicated by the cue marker on
REV the prompt output. If the cue marker points in towards the story, you are scrolling
forwards.
NEXT
Jump the prompt forward to the next story. (An ITEM is a STORY)
ITEM
PREV
Jump the prompt back to the previous story.
ITEM
RESET
Reset the prompt back to the start of the current story.
ITEM
Middle row of buttons (left to right):
NEXT
jumps to the next marker in the item that is being prompted
MARKER