Autocue US 10-11-01 WinCuePro News AvStar Interface - Manual (Page 83)

WINCUEPRO FOR AVSTAR USER GUIDE SCROLL CONTROLS
VERSION 1.30 83  QTV 2001
Zone is set to 5, scroll rates between 55 and 65 will mean the prompted text is not
scrolled.
Warning!
Users should not attempt to modify the IMT End Stop Scroll or IMT Center Stop
Scroll Tables. If modifications are required to either scroll table you should
contact your vendor.
7.5 Hybrid Serial IMT Multi-button Controller
The serial multi-button scroll control is designed to work with rundown queues
(rundown queues are not supported in WinCue LT). It is connected to a free serial port
on the back of the PC. It has a number of additional buttons not found on the IMT
simple serial or on screen scroll controls. These buttons simplify prompting scripts in a
rundown as they can be configured to perform a large variety of functions. In addition
this control allows the attachment of an optional foot control, enabling hands free
prompting by a presenter.
7.5.1 Configuring for Center Stop Mode
In the Configure Scroll Controls dialogue box, click on Hybrid Serial/IMT Multibutton
Controller. Now click on the Setup button, the Configure Hybrid Serial Multibutton
Controller dialog box will appear: