Rockwell Automation 20D PowerFlex 700S/700H Frames 10...14 IP00, NEMA/UL Open Power Structures - Manual (Page 50)

50 Rockwell Automation Publication PFLEX-IN020C-EN-P - July 2013
PowerFlex 700S and 700H Frames 10...14 IP00, NEMA/UL Open Power Structures
Output Power Terminal Locations
Refer to the figures below for the location of the output power terminals.
Figure 37 - Frames 10 and 12
DANGER DC BUS CONDUCTORS AND CAPACITORS OPERATE AT HIGH VOLTAGE. REMOVE POWER AND WAIT 5 MINUTES BEFORE SERVICING
DANGER DANGER DC BUS CONDUCTORS AND CAPACITORS OPERATE AT HIGH VOLTAGE. REMOVE POWER AND WAIT 5 MINUTES BEFORE SERVICING
Cat No. Cat No.
1234567890-*12345678 90-* 1234567890-*12345678 90-* FIELD INSTALLED OPTIONS: FIELD INSTALLED OPTIONS: FIELD INSTALLED OPTIONS:
U/T1
V/T2
W/T3 U/T1
V/T2
W/T3
DC-
DC+
L2
L1 L3
L2
DC-
DC+
L1 L3
Power Structure #1
Frame 10 and 12 Drives
Power Structure #2
Frame 12 Drives
Only
Output Power Terminals Output Power Terminals