Rockwell Automation 20D PowerFlex 700S/700H Frames 10...14 IP00, NEMA/UL Open Power Structures - Manual (Page 47)

Rockwell Automation Publication PFLEX-IN020C-EN-P - July 2013 47
PowerFlex 700S and 700H Frames 10...14 IP00, NEMA/UL Open Power Structures
Frames 13 and 14 NFE Converter to Inverter Connections
Frame 13 and 14 drives contain a set of cables used to link the NFE converters
and inverter units. Simply insert the cables into the appropriate connectors as
shown in figures
33 and 34 below.
Figure 33 - Frame 13 NFE Converter to Inverter Connections
Figure 34 - Frame 14 NFE Converter to Inverter Connections
IMPORTANT When you have completed these connections, replace the protective covers on
the drive.
Terminal
Grommet
NFE Converters
X1 X2 X3 X1
Inverters NFE Converters Inverters
X1 X2 X3 X1 X1
Connector
Terminal
Grommet
X1 X2 X3 X1 X1 X2 X3 X1 X1 X2 X3
NFE Converters Inverters NFE Converters Inverters Inverters
X1 X2 X3 X1
NFE Converters Inverters
X1 X2 X3 X1 X1 X2 X3
NFE Converters Inverters Inverters
Terminal
Grommet
X1 X1 X1
NFE Converters
Terminal
Grommet
Connector
Connector Connector