Frame 13 and 14 component/enclosure configurations – Rockwell Automation 20D PowerFlex 700S/700H Frames 10...14 IP00, NEMA/UL Open Power Structures User Manual
Page 11

Rockwell Automation Publication PFLEX-IN020C-EN-P - July 2013
11
PowerFlex 700S and 700H Frames 10...14 IP00, NEMA/UL Open Power Structures
Frame 13 and 14 Component/Enclosure Configurations
Frame 13 and 14 power structures are comprised of multiple NFE converters,
inverters, AC chokes and du/dt filters (frame 14 only). Therefore several
enclosures are required for proper installation. The figures below are examples of
typical installations based on the number of components installed for a drive.
Figure 2 - Frame 13 with Two NFE Converters
Figure 3 - Frame 13 with Three NFE Converters
NFE Converter
AC Choke
Inverter
du/dt Filter
A
B
C
D
A
A
B
B
C
C
C
600
(23.6)
800
(31.5)
Dimensions are in mm and (in.).
A
A
A
B
B
B
C
C
C
800
(31.5)
800
(31.5)
Dimensions are in mm and (in.).