Rockwell Automation DC3RD Digital Regenerative DC Drive User Guide 1/4 - 2 HP, 115/230 VAC - Manual (Page 34)

26 Operation
Mode 3 – Continuous cycle between forward and
reverse limit switches
1. Press the forward pushbutton for
forward motor rotation.
2. Motor rotates in the forward
direction until the forward limit
switch opens.
3. The motor stops and dwells when
the forward limit switch opens. Set
the dwell time by calibrating the
DWELL TIME trimpot (see page
23).
4. Motor rotates in the reverse
direction until the reverse limit
switch opens.
5. The motor stops and dwells when
the reverse limit switch opens.
The process repeats steps 2-5
until you press the STOP
pushbutton.
Reverse
Limit
Switch
Forward
Limit
Switch Forward Direction
Reverse Direction
STOP
AND
DWELL
STOP
AND
DWELL
Press FWD to go forward.
250-0285-rev1.qxd 4/26/00 9:36 AM Page 26