Rockwell Automation GV3000/SE AC Bookshelf Drive Hardware Ref, Installation, and Troubleshooting - Manual (Page 64)

7-14 GV3000/SE AC Bookshelf Drive Hardware Reference, Version 6.06
Table 7.8 – Wiring the Output Relay Terminal Strip
Terminal
Number Description Parameters/Wiring Connections
Wiring the Output Status Relays
28
29
30
31
Normally-Closed Contact
(Form B)
Normally-Closed Contact
Common (Form B)
Normally-Open Contact
(Form A)
Normally-Open Contact
Common (Form A)
Both Form A and Form B contacts are rated for
250 VAC/30 VDC at 5 amps resistive or 2 amps inductive
load.
The following parameter must be set:
• P.013: Output Relay Configuration
Note that depending on the setting of parameter P.013, the
relay coil will energize (the normally-open contact will close
and the normally-closed contact will open). Refer to the
GV3000/SE Bookshelf Drive Software Start-Up and
Reference manual for more information.
28 29 30 31