Rockwell Automation 2711 PanelBuilder 1200 Transfer Utility - Manual (Page 30)

Transferring Via the Data Highway Plus
Chapter 4
and Remote I/O
4-4
Choosing Manual Address Source
will disable the Terminal's
current application file.
Select Application to enable.
23662
PASS-THROUGH
DOWNLOAD OPTIONS
>Auto Restart
>Address Source
>PLC Type
>BAUD Rate
>Rack Number
>Starting Module
>Rack Size
>Last Chassis
>Module Group
>High/Low Byte
Up
Cursor
Save &
Exit
ENT
DEL
7 8 9
4 5 6
1 2 3
0 CLR
Down
Cursor
Change
Data
Yes
Manual
PLCĆ5/250
230.4K
77
0
Full
Yes
7
High
Manual
Address
Source
Block
Transfer
Configuring the Auto Restart After Download
The Auto Restart After Download parameter enables you to choose
whether or not the application will start executing after download.
If you choose Yes for Auto Restart, the PanelView 1200 terminal will start
executing the new application as soon as the download is completed. If you
choose No, the PanelView 1200 terminal will wait for operator
confirmation before executing the new application. When you call up the
Pass-Through Download Options screen, Auto Restart is automatically
selected. The default is No.
The rack assignments and PLC status of the previous application file will
remain in place until the moment the new application begins executing.
" If you want to change the Auto Restart, press CHANGE DATA .
Auto Restart changes to Yes.