Rockwell Automation 5370 Color CVIM Communications Manual - Manual (Page 140)

Chapter 6
Using the Pyramid Integrator Backplane
6–3
Select the Color CVIM module trigger source:
6. Select I/O menu .
7. Select the trigger source menu .
8. Select either , trigger sources or .
Note: When changing the host to/from the Pyramid Integrator, you must
“pick” the selection twice and then reboot the Color CVIM module. Make
sure that you save your configuration first!
If you are accessing results through a PLC–5/250, the 1024 words of shared
memory are numbered 0 through 1023. The PLC–5/250 treats the shared
memory area like an integer file. Table 6.A provides a summary of the data.
Refer to Appendix A, B, or C for more detailed information.
Table 6.A
Shared Memory Overview
Block Name Backplane Word #
Handshake 0
Reserved 1
Discrete I/O Outputs
(Host Command Block)
2 to 9
Reserved 10 to 15
First Discrete I/O Inputs
(Tool Inspection Results)
16 to 23
Second Discrete I/O Inputs
(Tool Inspection Results)
24 to 31
Results Block 1 32 to 95
Results Block 2 96 to 159
Results Block 3 160 to 223
Results Block 4 224 to 287
Results Block 5 288 to 351
Results Block 6 352 to 415
Reserved 416 to 1022
Interrupt Control Word 1023
Configuration Use Message Mail
Color CVIM Module
Configuration Instructions
(cont’d)
Obtaining Inspection Result
Information Using a PLC–5/250