Sending the configuration to the reader – Rockwell Automation 2755-SNx Adaptascan Bar Code Readers User Manual

Page 300

15–15

Downloading Match Codes via DH485 using a PLC-5 Processor and a 2760-RB Module

Publication 2755-6.8

Configure for an Output

1. Click the Output To button to specify which output activates

when a No-Read or No-Match occurs.

2. Under available Outputs, select Discrete Input/Output 2.

3. Click the Add>> button to add this selection to the

Output To: area.

4. Click OK to return to the main Match Table dialog.

5. Click Save and Close to return to the main Project dialog.

From the main Project dialog, click the Send Device button to
download the configuration to the bar code reader.

Use the Monitor dialog to verify the decoding of bar code labels.

Sending the Configuration
to the Reader