Rockwell Automation 2755-SNx Adaptascan Bar Code Readers - Manual (Page 16)

Preface P–3
Publication 2755-6.8
Chapter Title Contents
12
Communicating with a
PLC-5 Processor on a
DeviceNet Network using
Explicit Messaging
Shows how to configure a reader to communicate
with a PLC-5 controller over a DeviceNet network in
master/slave mode using explicit messaging.
13
Communicating with a
2760-RB Module over an
RS-232 Link Describes how to configure the reader to
communicate with a 2760-RB module using
RS-232 communication.
14
Communicating with a
2760-RB Module on a
DH-485 Network Describes how to configure the reader to
communicate with a 2760-RB module using
DH-485 communication.
15
Downloading Match
Codes via DH485 using a
PLC-5 Processor and a
2760-RB Module
Describes how to configure the reader to
communicate with a PLC-5 processor via DH485
protocol, using a 2760-RB module.
16
Communicating with
AdaptaScan Bar Code
Readers via DeviceNet
Peer-to-Peer Protocol
Describes how to configure three readers to
communicate with each other over a DeviceNet
network via peer-to-peer protocol.
17
Communicating with
PanelView 900
t
Terminals on a DeviceNet
Network
Describes how to configure the reader to
communicate with the DeviceNet versions of the
PanelView 900 terminals.