Rockwell Automation 2755-SNx Adaptascan Bar Code Readers User Manual
Page 3

Publication 2755-6.8
Preface
Contents of this Guide
P–2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Intended Audience
P–4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Related Publications
P–4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Technical Support Services
P–4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 1
Overview
1–1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hardware Requirements
1–1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Software Requirements
1–1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Related Publications
1–1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Internal Power Source
1–2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting a Power Supply to the Reader
1–2
. . . . . . . . . . . . . . . . . . .
Configuring the Reader
1–3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Create a New Project
1–3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Define a Bar Code Label
1–4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Define the DeviceNet Address
1–5
. . . . . . . . . . . . . . . . . . . . . . . . .
Configure the Scanner
1–5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configure the Decoder
1–6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configure the Discrete Input Module
1–6
. . . . . . . . . . . . . . . . . . . . .
Configure the Match Table
1–7
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configure a Package
1–8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configure the Auto-Load Trigger Source
1–9
. . . . . . . . . . . . . . . . . .
Sending the Configuration to the Reader
1–10
. . . . . . . . . . . . . . . . . . . .
Running the Application
1–10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter 2
Overview
2–1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hardware Requirements
2–1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Software Requirements
2–1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Related Publications
2–1
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting a Computer to the Reader
2–2
. . . . . . . . . . . . . . . . . . . . . .
Connecting a Power Supply to the Reader
2–2
. . . . . . . . . . . . . . . . . . .
Configuring the Reader
2–3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Create a New Project
2–3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Define the Bar Code Label
2–4
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Define the DeviceNet Address
2–5
. . . . . . . . . . . . . . . . . . . . . . . . .
Configure the Scanner
2–5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Configure the Decoder Trigger
2–6
. . . . . . . . . . . . . . . . . . . . . . . . .
Configure the ASCII Commands
2–6
. . . . . . . . . . . . . . . . . . . . . . . .
Configure the Serial Port
2–8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents
Using the Auto-Load
Function
Using ASCII Command Input