Rockwell Automation 2755 AdaptaScan Software - Manual (Page 171)

11–19
Publication 2755-838
The Auto-Load Trigger Source dialog configures the input which
initiates the the auto-load function. When triggered, auto-load
automatically enters decoded bar code data into match table entries
designated for auto-load. Open the Auto-Load Trigger Source dialog
by selecting the Auto-Load button on the Match Table dialog.
Enable
Enables and disables the autoload feature.
Auto-Load Trigger
Specifies the input to initiate an auto-load. Once initiated, auto-load
remains active until either:
•
the end of the auto-load trigger
•
match table entries designated as an auto-load function are filled
Select: To:
Device Specify the Reader that is the source of the trigger.
Input Specify the input to provide the auto-load trigger.
Configuring the
Auto-Load Trigger