Configuring the serial port – Rockwell Automation 2755 AdaptaScan Software User Manual

Page 114

8–5

Publication 2755-838

The Serial Port dialog configures the Reader’s serial port. Open this
dialog by selecting the Serial Port button on the Project dialog.

Protocol

Specifies the communication protocol for the Reader.

Select:

To:

Terminal

Communicate with devices that support terminal communica-
tions using ASCII protocol.

DF1

Communicate with a device supporting DF1 protocol such as a
PLC-5.

DH-485

Communicate with a DH-485 device using a point-to-point or
network connection (such as SLC 500).

Select the Edit button to edit the selected protocol.

Configuring the Serial Port