beautypg.com

Create the rslogix 5000 project – Rockwell Automation 1756-RIO ControlLogix Remote I/O Communication Interface Module User Manual User Manual

Page 22

background image

22

Publication 1756-UM534B-EN-P - November 2010

Chapter 1 The 1756-RIO Module-Getting Started

7. Click Finish.

Create the RSLogix 5000
Project

Once the add-on profile is installed, you are ready to create the RSLogix 5000
project. In this section, you will:

 start a new project.
 configure the controller in the project.
 add the 1756-RIO module to the project.
 enter the requested pack interval (RPI).

See also other documents in the category Rockwell Automation Equipment: