Rockwell Automation 1747-PBASE BASIC Development Software Programming Manual - Manual (Page 38)

Publication 1746-PM001A-US-P
3-4 Configuring Your Software
Loading Files from the Command Line
Files to be loaded may be specified on the command line with the
PBASE
command. If more than one file is specified (separated by a space), then windows
are created for each additional file. DOS wild card characters (* and ?) are allowed.
Examples:
PBASE *.BAS
opens windows as required to load all .BAS files in the current
directory.
PBASE TEST.BDL TEST.BAS
opens a window for TEST.BDL and then opens a
window for TEST.BAS.
Configuring Your Edit
Options Path: Toplevel Menu
→ → → →
Configuration menu
→ → → →
Setup and
Configuration menu
→ → → →
Edit settings
Path: Main Menu
→ → → →
Config
→ → → →
Setup and Configuration menu
→ → → →
Edit
settings
Selecting Edit settings from the Setup and Configuration menu causes the
following dialog box to appear:
/Yn Sets screen width to n
/V No snow suppression on
CGA monitor Do not wait for retrace on CGA video I/O. This
disables snow suppression on CGA monitors.
/EMSOFF Don’t use expanded memory Do not use Expanded Memory. This disables any
expanded memory options available through the
configuration menu.
Table 3.1 Command Line Switches
Switch Equals Summary