Rockwell Automation 1734-ADNX POINT I/O DeviceNet Adpater User Manual - Manual (Page 115)

1 Publication 1734-UM002C-EN-P - July 2003
Appendix
D
Default Data Maps
I/O messages are sent to (consumed) and received from (produced)
the POINT I/O modules. These messages are mapped into the
processor’s memory. This appendix lists the default data maps for
1734 POINT I/O and 1734-POINTBlock modules.
For the default data map of: See page:
1734-IA2 Input Module D-2
1734-IB2 Sink Input Module D-2
1734-IB4 Sink Input Module D-2
1734-IV2 Source Input Module D-3
1734-IV4 Source Input Module D-3
1734-OA2 Output Module D-3
1734-OB2E Electronically Protected Output Module D-4
1734-OB2EP Protected Output Module D-4
1734-OB4E Electronically Protected Output Module D-4
1734-OV2E Protected Sink Output Module D-5
1734-OV4E Protected Sink Output Module D-5
1734-OW2 Relay Sink/Source Output Module D-6
1734-OX2 Relay Output Module D-6
1734-IE2C Analog Current Input Module D-6
1734-IE2V Analog Input Module D-7
1734-OE2C Analog Current Output Module D-8
1734-OE2V Analog Output Module D-8
1734-IJ Encoder/Counter Module D-9
1734-IK Encoder/Counter Module D-9
1734-IM2 Input Module D-10
1734-IR2 RTD Input Module D-10
1734-IT2I Isolated Thermocouple Input Module D-11
1734-VHSC 24V dc High Speed Counter Module D-11
1734-VHSC 5V dc High Speed Counter Module D-12
1734-SSI Synchronous Serial Interface Absolute Encoder Module D-12
1734-232ASC ASCII Module D-13