Brother FAX 770 - Manual (Page 87)

77
R E M O T E F A X O P T I O N S ( F O R F A X 7 7 0 O N L Y )
Changing Fax Forwarding Number
You can change the default setting of your fax forwarding number from a
remote fax machine.
1 Dial your fax number.
2 When you hear the beep, immediately enter your Remote Access Code
(
1 5 9 ).
3 When you hear two short beeps, use the dial pad to press 9 5 4 .
4 Enter the new number of the remote fax machine where you want your fax
messages forwarded, and then press
.
You cannot use and as dial numbers. However, if you want to store a
pause, press .
5 To retrieve the Memory Status List, when you hear two short beeps, use the
dial pad to press 9 6 1 .
6 Use the dial pad to enter the number of the remote fax machine (up to 20
digits), and then press
.
7 After you hear your FAX beep, hang up and wait.
Your FAX calls the remote fax machine. The remote fax machine prints
the Memory Status List showing the new forwarding number.
8 Check the forwarding number.
If the forwarding number is incorrect, return to Step 1 to reset it.