Brother FAX 770 - Manual (Page 54)

44
C H A P T E R F I V E
Registering the Distinctive Ringing Pattern
1 Disconnect the FAX/MFC from any TAD or telephone company voice
mail.
2 Set the FAX/MFC to MANUAL mode.
3 Press Function , 0 , 1 . The screen displays the current setting of this
feature.
4 Press or to select the SET mode. The screen displays:
DISTINCTIVE:SET?
DISTINCTIVE:OFF?
5 Press Set when the screen displays DISTINCTIVE: SET?.
6 Press or to select the prestored ring pattern you want to assign.
(You will hear each pattern as you scroll through the four patterns.) Be
sure to choose the pattern assigned by the Telephone Company.
Ring
Pattern
1
2
3
4
Rings
long - long
short - long - short
short - short - long
very long (normal pattern)
7 Press Set .
8 Press Stop to exit.
Once you’ve registered the Distinctive Ringing pattern in your FAX/MFC,
you can turn this feature ON (or OFF). To change the setting, follow Steps
1 to 4 above, selecting ON or OFF.
Caller ID
The Caller ID feature of this FAX/MFC lets you use the Caller ID
subscriber service offered by many local phone companies. After a few
rings, the screen displays the telephone number of your caller (or name, if
available). Once you pick up the handset, the Caller ID information
disappears from the screen, but the call information remains stored in the
Caller ID memory.