Brother FAX 770 - Manual (Page 74)

64
C H A P T E R S E V E N
6 Press Set . The screen prompts you to select the type of number this is.
Use or to select the type you want.
FAX a fax only number
TEL a telephone (voice) number
FAX/TEL both a fax and telephone (voice) number
CHAIN a number (usually an access code) for chain dialing.
7 Press Set .
8 Return to Step 2 to store another One-Touch number—OR—Press Stop to exit.
When you dial an AUTO DIAL number, the screen displays the name
you’ve stored, or, if you haven’t stored a name, the number you’ve stored.
If you need to store a pause longer than 3.5 seconds, please call Brother
Customer Service at 1-800-284-4329 (USA), or 1-800-853-6660 (from
within Canada).
You can use chain dialing to store long dialing sequences. For example, to store
9 1 201 555 1234 987 65 4321, divide the number into two parts. Store the first
part as a Chain type number (this tells the system that the dialing sequence is
not complete).
CHAIN—9 1 201 555 1234
The last part of the One-Touch number must be stored as any of the other
following three types.
FAX or FAX/TEL or TEL—987 65 4321
Now, when you dial, just press the two keys (one after the other, in order)
where you’ve stored the two parts of the number.
Storing Speed Dial Numbers
You can store Speed Dial numbers, when you dial by pressing only three
keys. There are 40 Speed Dial locations. Even if you lose electrical power,
numbers stored in memory will not be lost.
1 Press Function , 6 , 2 . The screen prompts you to enter a location.
SPEED-DIAL? #
2 Use the dial pad to enter a two-digit location (01–40).
See
Speed Dialing
p. 68