Brother FAX 770 - Manual (Page 101)

91
M E S S A G E C E N T E R ( F O R F A X 8 7 0 M C A N D M F C 9 7 0 M C O N L Y )
Changing Fax Forwarding Number
You can change the default setting of your fax forwarding number from a
remote fax machine.
1 Dial your FAX/MFC number.
2 When you hear the beep, immediately enter your Remote Access Code
(
1 5 9 ).
3 When you hear two short beeps, use the dial pad to press 9 5 4 .
4 Enter the new number of the remote fax machine where you want your fax
messages forwarded, and then press
.
You cannot use and as dial numbers. However, if you want to store a
pause, press .
5 To retrieve the Memory Status List, when you hear two short beeps, use the
dial pad to press 9 6 1 .
6 Use the dial pad to enter the number of the remote fax machine (up to
20 digits), and then press
.
7 After you hear your FAX/MFC beep, hang up and wait.
Your FAX/MFC calls the remote fax machine. The remote fax machine prints
the Memory Status List showing the new forwarding number.
8 Check the forwarding number.
If the forwarding number is incorrect, return to Step 1 to reset it.