Rockwell Automation 442L-SFZNMN SafeZone Mini Safety Laser Scanner User Manual - Manual (Page 43)

Rockwell Automation Publication 10000337275 Ver 01—October 2014 41
Chapter 6 Electrical installation
Core assignment of the SafeZone Mini extension cable
Table 10: Core assignment of the
SafeZone Mini cable
Universal I/O connections of the SafeZone Mini
Do not use the universal I/O connection outputs for safety-related tasks!
The universal I/O connection outputs are purely application diagnostics outputs, e.g. for the transfer of information to
controllers.
Configuration connection
M8 × 4 (serial interface)
Fig. 39: Pin assignment configuration
connection M8 × 4
Table 11: Pin assignment configuration
connection M8 × 4
Notes  After configuration always remove the connecting cable from the configuration connection!
 After the configuration of the device has been completed, locate the attached protection cap to cover the
configuration connection.
Core Color Function
1
White Output for warning field 1
2 Brown Supply voltage 24V DC
3 Green Universal I/O connection 1
4
Yellow Universal I/O connection 2
5 Gray Output signal switching device OSSD1
6
Pink Output signal switching device OSSD2
7
Blue Supply voltage 0V DC
8 FE/shield Functional earth/shield
ATTENTION
4
1 2
3
Pin SafeZone Mini PC-side RS-232-D­Sub
1 Reserved Not assigned
2 RxD Pin 3
3 0V DC (voltage supply) Pin 5
4 TxD Pin 2