Rockwell Automation 56AMXN/B ControlLogix AutoMax Comm Module - Manual (Page 56)

Page 56 AutoMax DCSNet /RE RIO Module
Publication number 56AMXN-UM002A-EN-P November 2002
By default the register contents are shown in decimal. Uncheck Decimal
to display the register contents in hexadecimal.
DCS registers apply only to DCS master and slave operation. If you
attempt to monitor DCS registers when the module is configured for
remote I/O operation, 56AmxnMon returns an error.
DCS data can also be displayed in RSLogix 5000 using Monitor Tags to
display the appropriate tags.
Monitoring CLX Registers
This function is used only with the 56AMXN/A.
Select Monitor/ClxRegs to display the scheduled data the module is
exchanging with the ControlLogix processor in the ControlLogix Input,
Output and Status tables.
You can use this command to monitor the ControlLogix data in both
DCS and Remote I/O operation.
Figure 18 CLX Register Display
Select Inputs, Outputs or Status from the Area listbox.
Each area contains 256 registers. The dialog displays 100 registers at a
time. Select which group of 100 registers you want using the Ofs list box.
Each column displays 10 consecutive registers.