Yamato Scientific IN803 Low Temperature Incubators - Manual (Page 50)

46
Operation Method
Integrating Operation Time
™ The integrating operation time is a function to check the operation hours of unit. Its content can not be
changed.
1 Select the item in function menu
• Check that the power in turned on.
FUNCTION
①
Press the FUNCTION key. The function menu
starts and the Sub Display displays the items.
Select the item using the FUNCTION key.
2 Check integrating operation time
Acc. time 100hr
CANCEL
①
The integrating operation time from factory
shipment to now is displayed.
™ The integrating operation time indicates the total
sum of lapsed time in standby, operation start wait,
operation and operation end state.
② Press the CANCEL key to cancel the function
menu after checking the time.
Manual Defrost Operation
1 Select the item in function menu
DEFROST
Set TEMP 37.0℃↑
DEF Processing
①
Press the DEFROST key to start the defrost
operation.
• The unit ends the defrost operation when the
defrost time (parameter) is up. The STANDBY
lamp blinks and "DEF Processing" is displayed
during the defrost operation.
• Press the DEFROST key again to suspend
defrosting.
™ Defrost operation is not available in the standby
state.
™ The default value of defrost operation is five
minutes.