Yamato Scientific IN803 Low Temperature Incubators - Manual (Page 19)

15
Operation Method
Operation Mode and Function List
The operation mode consists of the following four modes.
No. Name Description Page
1. Fixed Temperature Operation Controls temperature with fixed temperature. 16
2. Auto Stop Operation Stops operation at specified time. 19
3. Auto Start Operation Starts operation at specified time. 22
4. Program Operation Starts program operation at specified time. 24
The function menus are listed below.
Name Function Page
Date/Time Sets date and time. 38
Timer Mode Sets timer mode. 39
Operation Start Signal Input Mode Sets operation start signal input mode. 40
Operation Stop Signal Input Mode Sets operation stop signal input mode. 41
Key Lock Mode Sets key lock mode. 42
Buzzer Mode Sets buzzer mode. 43
Calibration Offset Sets calibration offset temperature. 45
Integrating Operation Time Displays integrating operation time. 46
Defrost Operation Mode Sets defrost operation mode of refrigerator. 47
Cycle Defrost Operation Time Sets cycle defrost operation time of refrigerator. 48
Refrigerator Operation Mode Sets operation mode of refrigerator. 49
Communication Lockout Mode Sets communication lockout mode. 50
™
Operation start signal input mode:
When it is set to on, the unit starts operation after it receives the operation start signal in each mode.
™ Operation stop signal input mode:
When it is set to on, the unit stops operation after it receives the operation stop signal during operation in
each mode.