Yamato Scientific IN803 Low Temperature Incubators - Manual (Page 37)

33
Operation Method
Program Creation Example
• The program pattern below is explained as an example.
Step No. Setting Temp. Setting Time Repeat Start Repeat Count
S01 50.0℃ 30min No -
S02 20.0℃ 0min No -
S03 ℃ -10.0 15min S02 1
S04 - End - -
1
Press the PROGRAM key to display the step number selection
screen.
TROUBLE
ENTER CANCEL
Select step S01
Program OPR
2 Display "SO1" using the "▼▲". Select step S01
Program OPR
3
Press the ENTER key to display the "Set TEMP".
Set TEMP ► 0.0℃
S01
4
Press the ENTER key to display the setting temperature edition
screen. The cursor goes out and the setting temperature blinks.
Set TEMP 0.0℃
S01
5 Set the temperature to 50℃ using the "▼▲".
Set TEMP 50.0℃
S01
6 Press the ENTER key to decide the temperature.
Set TEMP ► 50.0℃
S01
7
Press the PROGRAM key to display the "Set time" selection
screen.
Set time ► 0min
S01
8 Press the ENTER key to display the setting period edition screen.
The cursor goes out and the setting period blinks.
Set time 0min
S01
9 Set the period to 30 min using the "▼▲".
Set time 30min
S01
10 Press the ENTER key to decide the period.
Set time ► 30min
S01