Yamato Scientific IN803 Low Temperature Incubators - Manual (Page 34)

30
Operation Method
Input Program
2 ② Select the "Set TEMP" and press the ENTER key. The temperature setting edition screen is
displayed. The blinking "" (cursor) goes out and the setting value blinks instead.
Set TEMP ► 30.0℃
S01
Set TEMP 30.0℃
S01
ENTER
(Selection screen)
→
(Edition screen)
③
Select the temperature using "▼▲" and press the ENTER key. The setting is decided and the
screen returns to the setting item selection screen.
TROUBLE
ENTER CANCEL
Set TEMP 37.0℃
S01
→
TROUBLE
ENTER CANCEL
Set TEMP 37.0℃
S01
(Decide the input) (Selection screen)
④
Press the CANCEL key to cancel the input. The value is cancelled and the screen returns to the
setting item selection screen.
TROUBLE
ENTER CANCEL
Set time 45min
S01
→
TROUBLE
ENTER CANCEL
Set time 30min
S01
(Cancel the input) (Selection screen)