Description and function of each part, Control panel – Yamato Scientific IN803 Low Temperature Incubators User Manual
Page 17
13
Description and Function of Each Part
Control Panel
AUTO START
FIXED TEMP
AUTO STOP
1
2
3 4
9
10
11
12
13
14 15
16 17
18
19
20
5
6
7
8
℃
PROGRAM
STANDBY
END
HEATER
REFRIGE
FUNCTION
PROGRAM
MENU
ENTER
CANCEL
DEFROST
POWER
TROUBLE
1 Main Display：
Displays the measured temperature and error code.
2 Sub Display：
Displays the operation and setting information.
3 TROUBLE Lamp：
Blinks when a trouble occurs.
4 DEFROST key：
Starts/stops the defrost operation.
5 FIXED TEMP lamp：
Lights while the fixed temperature operation is running.
Blinks while the choosing operation mode.
6 AUTO STOP Lamp：
Lights while the auto stop operation is running.
Blinks while choosing the operation mode.
7 AUTO START Lamp：
Lights while the auto start operation is running.
Blinks while choosing the operation mode.
8 PROGRAM Lamp：
Lights while the program operation is running.
Blinks while choosing the operation mode.
9 STANDBY Lamp：
Lights while the device is in standby state.
Blinks while the device is in startup wait state.
10 END Lamp：
Blinks at end of the autostop or program operation.
11 HEATER Lamp：
Lights while the heater works.
12 REFRIGE Lamp：
Lights while the refrigerator works.
13 FUNCTION Key：
Starts the function menu.
14 PROGRAM Key：
Starts the program menu.
15 MENU Key：
Starts the operation menu.
16 ▼(Down) Key：
Lowers down the setting value.
17 ▲(Up) Key：
Rises up the setting value.
18 ENTER Key：
Settles the inputted value/item.
19 CANCEL Key：
Cancels the current inputting.
20 POWER Key：
Turns ON/OFF the power.