Steriflow SC30 Series - Manual (Page 7)

a
CCeSSorieS
Connection: 1/2" Tri-Clamp ®
Maximum operating pressure: 116 psig (8.0 barg)
Maximum operating temperature : 347°F (176°C)
Surface finish
• Wetted surfaces: SF1, 20 Ra µin (0.5 µm Ra)
• External surfaces: Satin polish
S
ample
C
oolerS
SV Steam Sampling Valve
(see Ordering Code p.8)
Designed for use in high purity steam systems,
the SV utilizes a steam resilient Perlast
® seat
seal to ensure optimum service life and bubble
tight shut-off. The SV is designed to connect di-
rectly onto the sample cooler inlet to control the
flow of clean steam into the unit and condensate
out. The SV can also be used for any general
steam sampling application were a hand valve is
required.
1.7" (43mm)
10
9
8
7
6
5
2
3
4
1
Materials of Construction
1 Body 316L Stainless Steel
2 Valve Stem 316L Stainless Steel
3 Stem Seal
Viton (FDA and USP
Class VI compliant)
4 Seat Seal
Perloast ® (FDA and
USP Class VI compli-
ant)
5 Handle Polyethermide
6 -10
Non-wetted
components
Stainless Steel
Outlet
Inlet
Outlet
Inlet
SA Hose Adaptor
(see Ordering Code p.8)
The SA allows users to connect the 1/2"
Tri-Clamp sample outlet on any SC unit to a
sanitary flexible hose so the sample can be
directed where required. It can also be used
without a hose as a directional spout.
Connection: Inlet 1/2" Tri-Clamp ® outlet 1/4"
nose barb (6mm)
Surface finish: SF1 20 Ra µin (0.5 µm Ra)
A
A
1.50" (38mm)
-7-
2.8" (71mm)
0.83" (21mm)
1/4" (6mm)
1/2"
Tri-Clamp