Steriflow JSB Series - Manual

Steriflow by Jordan Valve
3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
[email protected] • www.steriflowvalve.com
3L/T-2R/S33 Series
JSB Series
Back Pressure Regulating Valves for Bio-Pharma
Gas Applications
J-Pure is the first fully drainable high purity gas back pressure
regulator designed and built specifically for hygienic, ASME BPE
gas applications.
Traditionally, regulator manufacturers adapted their industrial
gas regulators for use in biopharm by simply changing the con-
struction materials and surface finish. Not so with the J-Pure
Series Model JSB.
• It's been designed specifically to eliminate all threaded con-
nections and contaminant traps below the diaphragm.
• It is completely drainable out the inlet and outlet (an indus-
try first in compact hygienic regulator design), and compat-
ible with CIP and SIP practices.
• The simple trim design facilitates quick trim change out and
cleaning without valve removal or complete disassembly.
The durable valve body and metal trim components are ma-
chined from ASTM A479 316L SST barstock and finished to
ASME BPE SF5 (20Ra micro-inch (0,5 Ra μm), electropol-
ished) standard. The valve is outfitted with the rugged Jorlon
diaphragm and Teflon or PEEK seats, all FDA approved, USP
Class VI compliant materials. These materials of construction
enable the JSB to withstand the rigors of continuous SIP and
CIP processes if required.
F
eatures
• Fully drainable with no threaded connections, or contami-
nant traps below the diaphragm
• In-line removable seat and trim significantly reduce mainte-
nance time
• Barstock construction guarantees material integrity and
surface finish
• High flow rate coupled with high rangeability reduces need
for reduced trim sizes
• Minimized internal volume
• Proprietary Jorlon diaphragm material provides exception-
ally long life and CIP/SIP capability, and FDA and USP
Class VI compliance
• Soft seat material for ANSI Class VI shutoff
D
ocumentation
The following documentation is shipped with each order:
• Steriflow Unicert
— Traceable Material Heat Number for body and ferrules
— Certificate of Compliance to FDA and USP Class VI
— Certificate of Surface Finish
• Final Test Reports and Certificate of Origin, O2 cleaning,
etc., available upon request at time of quote, or order
s
urFace Finish
• ASME BPE SF5 (20 Ra μin ,
electropolished) – standard for all
external and wetted metal parts
• Other finishes optional
• O
2
cleaning - optional
a
pplications
Typically used in Biopharm or paren-
teral installations for modulating pres-
sure relief during filling, or other back
pressure applications. Ideal for clean
gases typically found in
bio-pharmaceutical, pharmaceutical
and food & beverage processes includ-
ing:
• Clean hygienic air
• Nitrogen
• Carbon Dioxide
• Argon
• Oxygen Sparge
• Custom purge or blanket gas
• Post SIP drying
Sanitar
y V
alv
es
JSB Series Back
Pressure
V
alv
es
CRN Registration Number Available