Steriflow JSHM Series - Manual

Steriflow by Jordan Valve
3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
[email protected] • www.steriflowvalve.com
JSHM Series Hand Metering Valves
Hand metering valve for precise manual control of
Biopharm and Pharmaceutical gas or liquids
The JSHM Series allows precision manual adjustment
of pharmaceutical liquid and gas flows. These valves
are most often used in bio-pharmaceutical and pharma-
ceutical R & D, and clinical and pilot scale production
facilities to manually set precise flows of liquids and gas.
They can also be used for precision fixed flow balanc-
ing of small to medium WFI or Clean Steam distribution
loops in large scale manufacturing.
The JSHM is the first rising stem diaphragm valve
to offer both precision metering capabilities and the
long durability needed for repeated SIP, or continu-
ous clean steam use.
C
onstruCtion
& D
esign
F
eatures
• Available in both inline and angled body variants
• 316L barstock construction guarantees material
integrity and quality surface finish
• Cv ranges that assure a valve that will fit your
application:
1/2" - 3/4": 0 - 0.4; 0 - 0.7; 0 - 1.5
1" - 1-1/2": 0 - 3.5
• Soft seat material for ANSI Class VI shutoff
• Minimal internal volume
• Proprietary Jorlon diaphragm material provides
exceptionally long life
• Top entry design and modular trim facilities five
minute in-line Cv trim, or diaphragm change outs, or
maintenance
• Zero hold up and gravity draining through the outlet
with valve open in vertical down flow installation, and
separately drainable inlet and outlet with valve open
in horizontal installation
• All designs are CIP and SIP capable
• Can be used on continuous clean steam and on
non-cavitating fluids
Sanitar
y V
alv
es
JSHM Series Hand Met
ering
V
alv
es
D
oCumentation
The following documentation is shipped with
each order:
• Steriflow Unicert
— Certificate of Material Compliance with
MTR's and Traceable Material Heat
Number for body, ferrules and
wetted trim
— Certificate of Compliance to FDA and
USP Class VI
— Certificate of Surface Finish
• Final Test Reports and Certificate of Origin
available upon request at time of order
a
ppliCation
Ideal for bio-pharmaceutical and pharmaceutical
research and production facilities and equipment
for precise, manual clean liquid and gas flow
control.
• WFI, growth media, buffer, solvent and
elution mix
• Clean air N
2
, CO
2
, O
2
, AR