Steriflow JSRHF Series - Manual

Steriflow by Jordan Valve
3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
[email protected] • www.steriflowvalve.com
JSRHF Series
High Flow Bioprocess Clean Gas Pressure Reducing Valves
The JSRHF Series high purity gas pressure regulator was
designed and built specifically for Bio-Pharma gas applications.
Traditionally, manufacturers adapted their industrial gas
regulators for use in biopharm by simply changing the
construction materials and surface finish. Not so with the
JSRHF. It's been designed specifically to minimize the
exposed threaded connections associated with those
traditional designs. And, it features an in-line removable trim
set to facilitate quick trim change out and cleaning without
valve removal or disassembly.
The durable valve body and metal trim components are
machined from ASTMA479 316L SST barstock and the in-
ternal components are finished to ASME BPE SF5 20Ra μin
(0.5 Ra μm), electropolished standard. The valve is
outfitted with the rugged Jorlon diaphragm and Teflon seats
and seals that are all FDA approved, USP Class VI
compliant materials. These materials of construction enable
JSRHF to withstand the rigors of SIP and CIP processes (if
required for valves used on liquid applications).
F
eatures
• In-line removable seat and trim facilitate cleaning and
maintenance
• Barstock construction guarantees material integrity and
surface finish
• Minimized internal volume
• Proprietary Jorlon diaphragm material provides excep-
tionally long life, CIP/SIP capability, and FDA and USP
Class VI compliance
• Soft seat material for ANSI Class VI shutoff
• Can be used on continuous clean steam, and on non-
cavitating fluids
D
ocumentation
The following documentation is shipped with each order:
• Steriflow Unicert
— Certificate of Material Compliance with MTR's and
Traceable Material Heat Number for body, ferrules
and wetted trim
— Certificate of Compliance to FDA and USP Class VI
— Certificate of Surface Finish
• Final Test Reports and Certificate of Origin available
upon request at time of order
s
urFace Finish
• ASME BPE SF5, 20 Ra μin (0.5 Ra
μm), electropolished – standard for all
internal and wetted metal parts.
External standard finish is 40 Ra μin
(1 Ra μm) electropolish
• Other finishes optional
• O
2
cleaning - optional
a
pplications
Ideal for clean gases typically found in
bio-pharmaceutical, pharmaceutical and
food & beverage processes including:
• Clean Filter Air
• Nitrogen
• Carbon Dioxide
• Argon
• Oxygen
• Custom purge or blanket gas
Sanitar
y V
alv
es
JSRHF
Series High Flow Pressure Reducing
V
alv
es