Steriflow SC30 Series - Manual

Steriflow by Jordan Valve
3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
[email protected] • www.steriflowvalve.com
Sample Coolers
Sample Coolers
SC30
The HSC30 is a portable sample cooler designed to
allow samples to be taken quickly and safely at any
accessible location within in a clean steam, or high
purity steam or WFI distribution system. Cooling water
connections are 3/4" Tri-Clamp
® compatible which
enable the unit to be connected easily to a local water
supply. The SC30 is suitable for autoclaving.
SC50
Designed for use in environments where the cooling
water supply may lead to fouling of the coil, the SC50
can be disassembled for cleaning. The orientation of
the sample connections also makes the SC50 suit-
able for continuous inline cooing applications such as
conductivity monitoring in high purity water systems.
SC60
The SC60 is intended for permanent mounting. Utiliz-
ing the same basic coil design as the SC30 and SC50
units, the SC60 is ideal for obtaining samples at both
the point of generation (clean steam generator, WFI
still), or at any permanent sampling point throughout
the distribution system. The SC60 can be sterilized in-
place, thus ensuring continuity of samples regardless
of testing frequency.
S
ample
C
ooler
a
CCeSSorieS
Steriflow offers a comprehensive range of ancillary
products for use with all models of sample coolers
(see Ordering Schematic). These include:
• SV, steam rated sample valve
• PTFE-lined sample hoses (for use with portable
SC30), or with the permanently installed SC50
and SC60
• Isolation valves
• Hose kits
• Adapter kits
Sample Coolers
SC30
SC50
SC60