Steriflow JSRH Series - Manual

Steriflow by Jordan Valve
3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
[email protected] • www.steriflowvalve.com
JSRH Series
High Flow Bio-Pharma Clean Gas Pressure Reducing Valves
The JSRH Series high purity gas pressure regulator was de-
signed and built specifically for Bio-Pharma gas applications.
It may also be used on non-cavitating liquids, although it is not
drainable.
Traditionally, manufacturers adapted their industrial gas
regulators for use in biopharm by simply changing the con-
struction materials and surface finish. Not so with the JSRH.
It's been designed specifically to eliminate the exposed
threaded connections associated with those traditional
designs. And, it features an in-line removable trim set to
facilitate quick trim change out and cleaning without valve
removal or disassembly.
The durable valve body and metal trim components are
machined from ASTMA479 316L SST barstock and the in-
ternal components are finished to ASME BPE SF5 20Ra μin
(0.5 Ra μm), electropolished) standard. The valve is outfit-
ted with the rugged Jorlon diaphragm and Teflon seats and
seals that are all FDA approved, USP Class VI compliant
materials. These materials of construction enable JSR to
withstand the rigors of SIP and CIP processes ( if required
for valves used on liquid applications).
F
eatures
• No exposed threaded connections below diaphragm
• In-line removable seat and trim facilitate cleaning and
maintenance in less than 10 minutes.
• Barstock construction guarantees material integrity and
surface finish
• Minimized internal volume
• Proprietary Jorlon diaphragm material provides excep-
tionally long life, CIP/SIP capability, and FDA and USP
Class VI compliance
• Soft seat material for ANSI Class VI shutoff
• Can be used on continuous clean steam, and on non-
cavitating fluids
•
D
ocumentation
The following documentation is shipped with each order:
• Steriflow Unicert
— Certificate of Material Compliance with MTR's and
Traceable Material Heat Number for body, ferrules
and wetted trim
— Certificate of Compliance to FDA and USP Class VI
— Certificate of Surface Finish
• Final Test Reports and Certificate of Origin available
upon request at time of order
s
urFace Finish
• ASME BPE SF5, 20 Ra μin (0.5 Ra
μm), electropolished – standard for all
internal and wetted metal parts. Exter-
nal standard finish is 40 Ra μin (1 Ra
μm) electropolish
• Other finishes optional
• O
2
cleaning - optional
a
pplications
Ideal for clean gases typically found in
bio-pharmaceutical, pharmaceutical and
food & beverage processes including:
• Clean Filter Air
• Nitrogen
• Carbon Dioxide
• Argon
• Oxygen
• Custom purge or blanket gas
• Non cavitating liquids
Sanitar
y V
alv
es
JSRH Series High Flow Pressure Reducing
V
alv
es