Steriflow SC30 Series - Manual (Page 3)

S
peCiFiCationS
Sample inlet/outlet connection: 1/2" Tri-Clamp ®
Cooling water connections: 3/4" Tri-Clamp ®
Shell, coil and fittings: 316L Stainless Steel
Coil surface area: 0.97 ft 2 (0.09m 2 )
Coil design pressure: 145 psig @ 365°F (10 barg @
185°C)
Shell design pressure: 145 psig @ 212°F (10 barg @
100°C)
Surface finish
• Wetted surfaces: SF1 20 Ra µin ( 0.5 µm Ra);
optional: SF5, 20 Ra µin ( 0.5 µm Ra electropolish)
Note: coil formed from tube having an internal finish
of 10 Ra
µin ( 0.25 µm Ra);
• External body and fittings: satin polish
Available accessories
• Sample valve
• Cooling water hose adaptor kit
• Sample hose
• Carrying case
• Extended Legs
Capacities (approximate)
• Steam – 10 l/h of condensate at 86°F (30°C) from
steam at 43.5 psig (3 barg)
• Water – 30 l/h of water from 185°F to 86°F (85°C to
30°C)
S
ample
C
oolerS
SC30 Sample Portable Cooler
The SC30 Sample Cooler is designed to facilitate
sampling of clean steam and Water For Injection
(WFI), while maintaining product sterility during test-
ing. Constructed in 316L stainless steel, the SC30 is
intended for portable operation at any access point in
those systems.
Sampling is achieved by regulating a flow of clean
steam or WFI through the central coil controlled us-
ing the SV hand valve. A cooling medium, typically
city main water, passes through the shell of the unit
absorbing heat from the test sample, condensing or
cooling the sample prior to discharge from the coil.
All surfaces wetted by the sample medium have a
maximum surface finish of SF1, 20 Ra
µin (0.5 µin Ra).
Features offered by the SC30 include:
• 316L stainless steel construction – suitable for
clean steam and WFI systems
• Self-draining design – eliminates possibility of
sample retention
• Fully sterilisable/autoclavable – satisfies valida-
tion criteria
• Availability of hygienic sample valve – allows fine
control of sample flow during testing
• Portable design – single unit can be used to take
samples throughout a system, carrying case
available
19.7
(500
sample inlet
cooling water
inlet
cooling water
outlet
-3-
G
7.9
(200)
6.3 (160)
6.9 (175)
12.0
(305)
11.0
(280)
12.3 (312)
24.0
(610)
Weight: 10# (4,5 kgs)
Note: Foot pads on extended leg
model are 2,4" (60mm) round
with extended legs