SDC LR100VDK ELECTRIC LATCH RETRACTION DEVICE KIT 9957 - Manual (Page 3)

Note:
Power the 100VDK devices using the MAIN OUTPUT terminals. The
zone controller cards are not required and can damage the latch
retraction units if used.
The low current draw of each device allows both devices to
operate simultaneously without the need for a sequencer.
KEY SWITCH
OR
ACCESS CONTROL
To AC Mains
EARTH GND
NEUTRAL
HOT
+ -
DC
Output
RED
SINGLE
DEVICE
BLK
VON DUPRIN POWER SUPPLY
MODELS
PS873 OR P914
To AC Mains
EARTH GND
NEUTRAL
HOT
MODELS
PS873 OR P914
+ -
DC
Output
RED
KEY SWITCH
OR
ACCESS CONTROL
(Controls Both Devices)
RED
BLK
BLK
PAIR
OF
DEVICES
VON DUPRIN POWER SUPPLY
P:\INSTALLATION INST\SWITCH KIT\INST-LR100VDK.vsd REV H 10-13 Page 3