3 port configuration, Port configuration, Page 28 – Omnitron Systems Technology iConverter 2FXM User Manual User Manual
Page 28
4.3
PORT CONFIGURATION
The Port configuration screen provides access to the port level configuration parameters, such as, Port
Access, Bandwidth Control, SFP information, 802.3ah, Port VLANs, Tagged VLANs and cNode Loopback.
To access the Port configuration screen, select ‘C’ from the Module configuration screen and press
PI
Module - iConverter 2FXM iConverter, Serial Agent
Identifier -
Chassis Number
= 1
Port VLAN Path Setup
Slot Number
= 11 ----------------------------------
Model Number
= 8959-0
11: Port 1 to Port 2
Enable
On
12: Port 1 to BP A
Enable
On
Port Access Control Setup
13: Port 1 to BP B
Enable
On
----------------------------------
14: Port 2 to BP A
Enable
On
1: Port 1 Enable
On
15: Port 2 to BP B
Enable
On
2: Port 2 Enable
On
16: BP A to BP B
Enable
On
17: Port 1 to Mngmnt
Enable
On
Enhanced Features
18: Port 2 to Mngmnt
Enable
On
----------------------------------
19: BP A to Mngmnt
Enable
On
3: 802.1Q Processing Enable
Off
20: BP B to Mngmnt
Enable
On
4: Configure Tag VLAN Control
5: Configure VLAN Membership
Bandwidth Control
6: Save TAG VLAN parameters --------------------------------
7: Configure 802.3ah parameters
21: Ingress rate Port 1
No Limit
8: Configure 802.3ah events
22: Egress rate Port 1
No Limit
9: SFP Information
23: Ingress rate Port 2
No Limit
10: cNode Loopback
24: Egress rate Port 2
No Limit
Enter Choice, Previous Screen(0), (H)elp, E(x)it >
SA
Module - iConverter 2FXM iConverter, Serial Agent
Identifier -
Chassis Number
= 1
Port VLAN Path Setup
Slot Number
= 11 ----------------------------------
Model Number
= 8959-0
11: Port1 to Port2
Enable
On
12: Port1 to Mngmnt Enable
On
Port Access Control Setup
13: Port2 to Mngmnt Enable
On
----------------------------------
1: Port 1 Enable
On
Bandwidth Control
2: Port 2 Enable
On
--------------------------------
14: Ingress rate Port 1 No Limit
Enhanced Features
15: Egress rate Port 1 No Limit
----------------------------------
16: Ingress rate Port 2 No Limit
3: 802.1Q Processing Enable
Off
17: Egress rate Port 2 No Limit
4: Configure Tag VLAN Control
5: Configure VLAN Membership
6: Save TAG VLAN parameters
7: Configure 802.3ah parameters
8: Configure 802.3ah events
9: SFP Information
10: cNode Loopback
Enter Choice, Previous Screen(0), (H)elp, E(x)it >
Page 28