MTS Fracture Analyzer - Manual (Page 42)

Description Item
Select the check box to allow a range to automatically expand if the data
exceeds the maximum and minimum ranges. The chart does not rescale to
a smaller range. Expand Only
5.2.5.0 Line and Symbol Properties
Line and Symbol Display Properties
Description Item
Adjust the opacity to better see through traces when they overlap. If you set
the opacity to a lower value, it makes the trace more transparent. Opacity
Select this check box to draw lines between data points. Clear the Draw Line
check box and click OK to only show data points if a Symbol Type is selected;
otherwise, the trace is not drawn. Draw Line
Select the thickness of the lines from 1 to 10 points. Line Thickness
Select the line style as solid, dotted, or dashed. Line Type
Select the type of symbol to mark the location of data points. If you do not
want to mark the data points with symbols, choose the blank selection in the
list. Symbol Type
Select the size of the data point symbols. To automatically size the symbols,
select the multiple size image, which is the first item in the drop-down list. Symbol Size
42 MTS TestSuite™ Fracture Analyzer User Guide
5.0 Customizing the Main Window