MTS Criterion 40 - Manual User Manual
Page 61
Single-Column Load Frame
MTS Criterion
®
Series 40 Product Manual
Installation
61
9. Install the safety switch. Prior to assembling the safety switch mount plate
(Item 6), put the cable of the safety switch (Item 4) along the groove in a
left-ward direction. (The cable is pre-mounted in the slot of the right-side
panel assembly). Using two M6 X 20mm socket head screws and the M6
C'bore butt fasteners, mount the safety switch mount plate to the side panel.
10. Position the safety switch (Item 4) with the arrow-on switch pointing
forward. Using the M4 x 35mm crossed discal screws and M4 washers,
mount the switch to the safety switch mount plate.
11. Place the front door (Item 13) into position and secure the hinges to the left-
side panel’s hinges.
12. Check for proper alignment of the safety switch and adjust as needed.
13. Remove the protective covering from the panels and door.
When the assembly is completed, it should look like the previous figure.
Model C41 Load Frame with Enclosure
Criterion_product manual.book Page 61 Monday, July 28, 2014 3:52 PM
- Series 111 Accumulator (40 pages)
- Series 249G2 Swivels (34 pages)
- Series 201 Actuators (40 pages)
- Series 215 Rotary Actuator (68 pages)
- Series 242 Actuators (40 pages)
- Series 244 Actuators (68 pages)
- Series 247 Actuators (40 pages)
- Series 248 Actuators (46 pages)
- 709 Alignment System (158 pages)
- Series 609 Alignment Fixture (70 pages)
- 494 Controller Hardware FT 40 (344 pages)
- ReNew Technical Reference (50 pages)
- DCPD Measurement System (46 pages)
- Bionix EnviroBath (40 pages)
- FGW900 High-temperature Furnace (38 pages)
- Model 409.83 Temperature Controller (40 pages)
- Series 651 Environmental Chambers (30 pages)
- Series 653 High-Temperature Furnaces (38 pages)
- Series 658 Environmental Chamber (24 pages)
- Series FEC Environmental Chamber (48 pages)
- Model 685.53 Grip Control Module (24 pages)
- Series 685 Hydraulic Grip Supply (48 pages)
- Bend Fixture-10 kN (2 pages)
- Grip-Manual Bend Fixture-100 kN (2 pages)
- Grip-Manual Bollard-2 kN (2 pages)
- Grip-Manual Bollard-500 N (2 pages)
- Compression Platen-100 kN-100mm (2 pages)
- Compression Platen-100 kN-150mm (2 pages)
- Compression Platen-100 kN-200mm (2 pages)
- Compression Platen-20 kN (2 pages)
- Compression Platen-20 kN-100mm (2 pages)
- Compression Platen-20 kN-200mm (2 pages)
- Compression Platen-20 kN-SST (2 pages)
- Compression Platen-500 N FYC502A (2 pages)
- Compression Platen-500 N FYB502A (2 pages)
- Compression Platen-500 N-50mm (2 pages)
- Grip-Pneumatic Vise-Style-1 kN (2 pages)
- Pneumatic Bollard-500 N (2 pages)
- Scissor-Style-2 kN (2 pages)
- Scissor-Style-5 kN (2 pages)
- Screw-Style-5 kN (2 pages)
- Screw-Style-5 kN-SST (2 pages)
- Bend Fixture-1000 kN (2 pages)
- Bend Fixture-300 kN (2 pages)
- Bolt Grips (32 pages)