MTS Criterion 40 - Manual - Manual (Page 41)

Specifications
MTS Criterion ® Series 40 Product Manual
Introduction 41
Specifications of Model C44
P ARAMETER S PECIFICATION
M ODEL C44.104 C44.304
Maximum rated force capacity 10 kN 30 kN
Force capacity options 100 N, 250 N, 500 N,1 kN, 2.5
kN, 5 kN, 10 kN 100 N, 250 N, 500 N,1 kN, 2.5
kN, 5 kN, 10 kN, 20 kN,30 kN
(20 lbf, 50 lbf, 110 lbf, 220 lbf,
500 lbf, 1100 lbf, 2200 lbf) (20 lbf, 50 lbf, 110 lbf, 220 lbf,
500 lbf, 1100 lbf, 2200 lbf,
4400 lbf, 6600 lbf)
Frame type 2 Guide columns
Floor-standing 2 Guide columns
Floor-standing
Test zone Single or Dual Single or Dual
Maximum test speed 2000 mm/min (78.7 in/min) 1020 mm/min (40.16 in/min)
Minimum test speed 0.005 mm/min (0.0002 in/min) 0.005 mm/min (0.0002 in/min)
Position resolution 0.000049 mm (0.0000019 in) 0.00006 mm (0.0000024 in)
Vertical test space
Standard length
Extended length
1190 mm (46.9 in)
1490 mm (58.7 in)
1190 mm (46.9 in)
1490 mm (58.7 in)
Crosshead travel
Standard length
Extended length
1000 mm (45.28 in)
1300 mm (51.18 in)
1000 mm (45.28 in)
1300 mm (51.18 in)
Space between columns 400 mm (15.75 in) 400 mm (15.75 in)
Frame height
Standard length
Extended length
1951 mm (76.8 in)
2251 mm (88.6 in)
1951 mm (76.8 in)
2251 mm (88.6 in)
Frame width 861 mm (33.9 in) 861 mm (33.9 in)
Frame depth 689 mm (27.1 in) 689 mm (27.1 in)
Weight
Standard length with enclosure
Standard length without enclosure
Extended length with enclosure
Extended length without enclosure
403 kg (886.6 lb)
367 kg (807.4 lb)
425 kg (935 lb)
383 kg (842.6 lb)
431 kg (948.2 lb)
395 kg (869 lb)
452 kg (994.4 lb)
410 kg (902 lb)
Power requirements 200-230 V AC
10 Amp
50/60 Hz
2000 W
1 Phase 200-230 V AC
12 Amp
50/60 Hz
2400 W
1 Phase
Criterion_product manual.book Page 41 Monday, July 28, 2014 3:52 PM