Lenze E94AxHE Technology Application Electronic gearbox - Manual (Page 14)

9400 Technology applications | Electronic gearbox
Introduction
Functions with synchronisation via the electrical shaft
14
L
EDS94TA10030xxxx EN 1.2 - 11/2009
3.8 Functions with synchronisation via the electrical shaft
The functions of the electrical shaft are built on each other and thus are scalable:
Electronic gearbox
The electronic gearbox represents the simplest function in the DC-bus operation via the
electrical shaft. The function is suited for e.g. material transport or material processing. A
direct synchronism of tools to a material path can be created without direct position
reference or for stretching machines with adjustable stretching ratio.
Absolute synchronism
This function is suited for applications with continuously rotating tools (e.g. groove
cylinder), which are fed with material in a fixed machine cycle and for which several tools
have to be synchronised to each other.
Relative synchronism (with mark synchronisation)
This function is suited for processing continuous material in the form of a material web.
Here the tools (e.g. pressure cylinders) are aligned via marks to e.g. print images which are
located on the web. There must be no risk of collision. We distinguish between "Relative
synchronism with register formation and mark synchronisation" and "Relative
synchronism with register control".
Absolute table synchronism (cam)
Like "Absolute synchronism", although the tools can also perform a non-linear movement.
Relative table synchronism (with mark synchronisation)
Like "Relative synchronism", although the tools can also perform a non-linear movement.
Electrical shaft
Relative table synchronism (cam with mark synchronisation)
Absolute table synchronism (cam)
Relative synchronism (with mark synchronisation)
Absolute synchronism
Electronic gearbox