Lenze EDB9300UES - Manual (Page 138)

Operation and Software
BA8230 133
BDE: Changes
It is possible to inhibit all parameter changes (except for passwords) deliberately via
the operating module. This selection parameter is available as from protection level 1.
Select list: - Enabled
- Disabled
As supplied: Enabled.
Parameters can only be adjusted through the control unit when this parameter is set
to “BDE: Changes = Enabled”. No parameters can be adjusted when this is set to
“BDE: Changes = Disabled”.
Password Level 2
Parameter for entering the password for level 2.
When the correct password for level 2 is entered, the parameters of level 2 are
displayed:
- Standard parameters
- Protected parameters
- Hidden parameters.
In the default setting, no password is specified.
Enable:
Press ENTER twice
New Password 2
This parameter specifies a new password for accessing level 2.
4.4.10 Language In menu "10 = LANGUAGE SELECTION", the selection parameter „Lanuage“
specifies the language of the language modules stored in the 8230 frequency inverter.
All parameter and variable names and the texts in the event and faul memory are
changed. Special national unit of variables such as temperature, are not changed.
Select list: - GERMAN
- ENGLISH
- FRENCH
As supplied: GERMAN
All unit parameters and messages are displayed in English if
“Language = ENGLISH ”.
Show/Hide Bookmarks